Repiping a Carrollwood home starts with knowing what is in the walls. Here is a plain guide to pipe types, costs and permits, plus a free, no-obligation estimate.
About Carrollwood
Carrollwood is an unincorporated community in northwest Hillsborough County. The Carrollwood census-designated place had 34,352 residents in 2020. The original neighborhood was founded in 1959 around Lake Carroll and largely built out in the 1960s, with more than 900 homes built from 1959 to 1970, and the area expanded westward in the 1970s and 1980s. (Source: Wikipedia, Carrollwood)
Original 1960s Carrollwood homes often have copper or galvanized supply lines and cast iron drains, while the later western sections fall in the polybutylene era.
What's likely in the walls of Carrollwood homes
The year a home was built is the best first clue to its plumbing. These are general patterns, not a diagnosis. Remodels and past repairs change what is there, and a licensed plumber confirms it on site.
- Homes from the 1950s to mid-1970s commonly have copper or galvanized supply lines and cast iron drains under the slab.
- Homes built from about 1978 to 1995 may have polybutylene, the gray plastic supply pipe that many Florida insurers will not cover.
Learn more: Copper pinhole leaks · Galvanized replacement · Polybutylene replacement · Repiping for insurance.
Signs your Carrollwood home needs new pipes
- Leaks that keep showing up in different places
- Rusty or brown water, or stains in sinks and tubs
- Low pressure at several fixtures
- Gray plastic pipe marked PB2110 at the water heater or under sinks
- An insurer or four-point inspection that flagged the plumbing
Repiping services in Carrollwood
Permits for Carrollwood repipes
Carrollwood is in unincorporated Hillsborough County, so plumbing permits generally go through the county. Hillsborough County lists "replacement or relocations of any standpipe, water supply, sewer, drainage" piping among repairs that are not minor and need a permit. Questions can go to Hillsborough County Development Services at (813) 272-5600. (Source: Hillsborough County, work exempt from permits)
Your contractor should pull the permit, schedule the inspection and give you the paperwork. Insurers and future buyers often ask for it. Check any contractor's Florida license with the state's DBPR license search.
What repiping costs in Carrollwood
Angi's Tampa repiping guide, updated May 27, 2026, puts the typical range at $1,514 to $15,135, with most homeowners paying around $7,568. (Source: Angi, Tampa repipe cost guide, updated May 27, 2026) Those are cost-guide figures, not quotes. Your price depends on the size of the home, the number of bathrooms, PEX versus copper, attic and wall access and whether patching is included. See what drives repiping costs.
Why a local contractor matters in Carrollwood
A local contractor already knows how homes in Carrollwood were built: slab floors, attic routes, the permit office and how long inspections take. That usually means a more accurate quote and fewer surprises.
Repiping Tampa Bay does not do plumbing work. We connect Carrollwood homeowners with independent, licensed local contractors, who provide the estimate, permit, work and warranty.
Nearby areas we serve
We also help homeowners in Town 'n' Country, Lutz and Tampa. See all service areas.
Common questions
Do I need a permit to repipe a home in Carrollwood?
In most cases, yes. Replacing water supply piping is generally permitted work. Your licensed contractor should pull the permit for your address and schedule the inspection.
How much does it cost to repipe a house in Carrollwood?
Angi's Tampa guide puts a typical repipe at $1,514 to $15,135, with most around $7,568. Your written quote depends on your home's size, fixtures, pipe material and access.
Who does the work?
Independent, licensed local plumbing contractors. Repiping Tampa Bay connects homeowners with them and does not perform plumbing work.